Install script (retired)

The command-line installer has been removed. Add and update panels through Panel Assistant in Home Assistant.

Add and update panels from Home Assistant with Panel Assistant instead. A panel that was installed with the script keeps working. Add it to Panel Assistant and it is connected rather than reinstalled, and Panel Assistant then offers its updates.

Getting ADB onto the network

On some Tuya TPA10 and Smatek panels, ADB at first works only over USB. Connect the USB cable and turn on network ADB before adding the panel in Home Assistant:

adb devices                   # accept the on-screen RSA prompt if shown
adb root                      # if this firmware supports it
adb tcpip 5555                # expose adb on the network; this resets on reboot
adb connect 192.168.1.50:5555 # replace this address with the panel's address

Removing ha-paneld from a panel

1. Open the panel’s web interface at http://<panel>:8888, go to Install and choose Restore the home screen. This turns the vendor apps that ha-paneld switched off back on and gives the panel its own home screen again. Do this first: without it the panel has no home screen once ha-paneld is gone. If Hardened security mode is on, approve the request on the panel.
2. In Home Assistant, delete the panel’s Panel Assistant entry under Settings, Devices and services.
3. Uninstall ha-paneld from the panel’s Android Settings, Apps.

Access routes and security mode

Hardware profile recommendations are report-only. Choosing a profile is not consent to disable packages, persist ADB, install privileged software or change display settings. Packages you have already tamed on the vendor packages card are still tamed again at every boot.

Hardened security mode requires someone at the panel to approve selected high-impact remote actions. It can only be turned on at the panel. Network ADB cannot be used while it is on, so return the panel to Relaxed mode at the panel before installing or updating over ADB.

Building it yourself

The app is free and open source, and the development environment page describes building it.