Shelly Wall Display X2

Note

No unit of this model has been tested. Panel Assistant matches it to the bundled legacy Shelly profile, which no X2 has run yet. See the Wall Display family page for sourcing, the firmware OTA mechanism, access model and security notes shared across the whole line.

The Wall Display X2, firmware codename Pegasus, is a 6.9 in 1440×720 panel on a Spreadtrum/UNISOC SC7731E (Cortex-A7), Android 8.1. It is on the legacy WallDisplay (armeabi-v7a) OTA track, alongside the original.

Initial debugging access

Network ADB on TCP port 5555 without a computer: not established on this model. Initial USB debugging and the vendor-menu unlock are also unverified here. The X2i procedure is confirmed on the X2i only; shared firmware does not prove that it works here. Ask Shelly for the procedure for your model and firmware. Use the USB installer only once USB debugging and a USB data connection are available. A root-capable build alone does not enable debugging.

Also sold as

Shelly Wall Display X2, SAWD-2A1XX10EU1, firmware codename Pegasus, device ID e500_7731e_32u_o.

SoC	Spreadtrum/UNISOC SC7731E, Cortex-A7
Display	1440×720, 6.9 in
Android	8.1
ABI	armeabi-v7a
Sensors	Temperature, humidity, ambient light and proximity documented; Android API exposure unverified
Relay	1 output
Root	Not established on this model; no OTA build-type evidence established for this model specifically
Released	About January 2025 (est.); announced with Shelly’s Gen4 series at CES 2025 (Shelly’s own CES 2025 press page)

See the Wall Display family page for the full access-model reasoning, the OTA update endpoints (WallDisplay track) and the firmware version history.

Source

Shelly Wall Display X2 knowledge base.